top
   
Vyhľadávanie

APC AP7921B Rack PDU, Switched, 1U, 16A, C20 -> (8)C13 - Horizontal - detail

SkupinaAPC
Kód305148
PartNoAP7921B
Dostupnosťdo 2 týždňov
Množstvo
Cena bez DPH818.15 EUR24 647.59 SKK
Cena s DPH981.78 EUR29 577.10 SKK
Recyklačný poplatokbez DPH: 0.28 EUR; s DPH: 0.34 EUR; SEWA 6.3.2 Nezaradené IT&C zariadenia do 3 kg
Cena celk. 982.12 EUR29 587.23 SKK
Konverzný kurz 1 EUR = 30.1260 SKK 
Záruka24 mesiacov
Status - Tovar na objednávku
Stránka výrobcahttps://www.apc.com/shop/cz/cs/products/Stojanov%C3%A1-PDU-p-ep%C3%ADnan%C3%A1-1U-16A-208-230V-8-C13/P-AP7921B
APC AP7921B Rack PDU, Switched, 1U, 16A, C20 -> (8)C13 - Horizontal
Obrázok je len pre ilustráciu

Popis produktu
APC's Switched Rack Power Distribution Units (PDUs) are premium solutions to many of the power management problems seen in today's IT environments. Some of the problems are unauthorized use of power outlets, locked-up equipment, in-rush current, overloaded circuits, and the need of remote access to power outlets in the rack. The Switched Rack PDUs address these problems through individual outlet control, power on and off delays, current monitoring, alarm thresholds, and network management.  
Individual outlet control allows users to turn outlets on, turn outlets off, or recycle power to equipment, which can reboot locked-up equipment and avoid unauthorized use of outlets. Power delays allow users to determine the order in which equipment is powered up or down. Utilizing the power delay feature will avoid in-rush current, which can cause overloads.
Monitoring the current draw at the rack level is key to avoiding downtime due to overloaded circuits. The Switched Rack PDUs provide an aggregate current draw, which can be viewed remotely or locally, via digital display. In addition, alarms will be generated based on user-defined thresholds to alert users of potential circuit overloads.
Users can access, configure, and control the Switched Rack PDUs through Web, SNMP, or Telnet Interfaces.


Key Features & Benefits:
" Individual Outlet Control:  Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).
" Current Monitoring:  Monitors the aggregate current draw of the power distribution unit. This helps avoid overloaded circuits by warning installers and users that they are close to the maximum amperage draw of the unit.
" Current Alarm Thresholds: Users can define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.
" Power on and off Delays:  Allows users to configure the sequence in which power is turned on or off for each outlet.  This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads.  Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.
" Remote Management Capabilities: Full-featured network management interfaces that provide standards-based management via Browser, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time.

Description:  Power distribution that remotely controls power to individual outlets and monitors the aggregate power consumption  
Features:  19 inch Rack-Mountable, Alarm Thresholds, Flash Upgradeable, Local Current Monitoring Display, Multiple User Support, Power Delays, Remote Current Monitoring, Remote Individual Outlet Control, Remote Management Capabilities  
Includes:  Installation Guide, Rack Mounting Brackets, User Manual  

Output
Voltage(s) (main only):  208, 230 V  
Maximum Total Current Draw per Phase:  16 A  
Output Connections:  (8)IEC 320 C13  

Input  
Nominal input voltage  208, 230  
Input frequency (Hz)  50/60 Hz  
Input Connection Type  IEC-320 C20    
Cord Length  8.2 feet ( 2.5 meters)  
Maximum Input Current per phase  16 A  
Load Capacity  3680  

Net Weight  2.27 KG  
Maximum Height  44.00 mm  
Maximum Width  445.00 mm  
Maximum depth  108.00 mm  
Shipping Weight  3.45 KG  
Shipping Height  70.00 mm  
Shipping Width  470.00 mm  
Shipping Depth  343.00 mm  
Color  Black  

Súvisiace produkty
APC AP8958EU3 Rack PDU 2G, Switched, ZeroU, 16A, IEC309->(7) C13 & (1) C19, IEC309 CordAPC Switched Rack PDU , Vstup: 200V, 208V, 230V , Typ připojení vstupu: IEC 309 16A 2P+E , Délka přívodního kabelu: 9.84 stop ( 3 metrů ) , Výstup: 200V, 208V, 230V , Připojení výstupu: IEC 320 C13,IEC 320 C19
do 2 týždňov
označiť produkt:
1 253.87 EUR  s DPH
37 774.03 SKK  s DPH
Označené produkty: